# About us

> Who NVMERIA is, what it does, the projects it takes on, and the meaning of its brand and name.

NVMERIA brings together TECSA’s expertise in numerical simulation, computational engineering and risk analysis applied to safety.

## Our work

NVMERIA develops numerical models of the phenomena on which the safety of plants, buildings and infrastructure depends: releases of hazardous substances, fires and explosions, structural behaviour under exceptional actions, egress and crowd dynamics, reliability of protection systems.

The model is the tool. What is delivered is a technical report that answers a precise question, states its assumptions, quantifies its uncertainty and sets out the conditions within which its results remain valid.

## Where we step in

Simulation is most useful in three situations: when the prescriptive route leads to disproportionate or impractical solutions and a performance-based demonstration is needed; when no applicable simplified model exists for the phenomenon; when a result will have to be upheld before a regulator or in court.

NVMERIA works both on direct appointment and in support of other designers. Its work also includes independent review of models developed by third parties.

## Three working principles

### Geometry and physics are chosen together

The space decides what matters: ventilation in an enclosed room, the obstacles that accelerate the flame among the pipes of a plant, the wind in the open. Each case therefore calls for different choices of turbulence, combustion and computational grid, and the geometry gets the same care as the physics.

### Every value with its range

Each design value is reported with the range it may vary within and with its sensitivity to the parameters that govern it: geometry, boundary conditions, source term, modelling choices.

### Every outcome goes into the report

Computation is not there to confirm a position decided in advance: it may support it or contradict it. Either way the result goes into the report, because a document that reports only favourable outcomes does not stand up to review.

[## A Roman goddess, a Japanese abacus, a bead outside the frame The frame stands for what can be computed: data, models, grids. The bronze bead sits outside the frame but stays on its rail: the conclusions go beyond the calculation without losing touch with the numbers they rest on. ## A deity who taught counting Numeria is a minor Roman deity: in The City of God, Augustine lists her among the deities of childhood as the one who teaches counting. In early Latin, the adverb numero also meant “quickly”. The name therefore holds two qualities a simulation needs: an accurate count and a result that arrives in time. Name and brand](https://www.nvmeria.it/en/brand/)

## The people

NVMERIA’s results depend on the experience of the people who produce them. These are the engineers who set up, run and check the models.

LF

### Prof. Luca Fiorentini

Owner and Director, TECSA

Risk analysisRAM analysisFire engineeringForensic engineering

He works on risk analysis and RAM analysis, fire risk assessment, fire safety engineering and forensic engineering of industrial accidents and complex events. He is the author of four internationally recognised books on these subjects, published by Wiley. He teaches and carries out research at university level. He sits on numerous international standards and research committees (NFPA, SFPE) and on the editorial boards of several scientific journals.

Credentials and publications

- Fiorentini L., Sicari R., Cancelliere P. (2026). *ALARP: Demonstrating and Documenting Risk Reduction Across Engineering Sectors*. Wiley, in press
- Fiorentini L., Dattilo F. (2023). *Fire Risk Management: Principles and Strategies for Buildings and Industrial Assets*. Wiley · doi:10.1002/9781119827467
- Fiorentini L. (2021). *Bow-Tie Industrial Risk Management Across Sectors: A Barrier-Based Approach*. Wiley · doi:10.1002/9781119523857
- Fiorentini L., Sicari R. (2020). *Analisi, valutazione e gestione operativa del rischio. Bow-Tie, Root Cause Analysis ed altri strumenti conformi alla ISO 31000 per la gestione sistemica del rischio nelle organizzazioni*. EPC Editore
- Fiorentini L., Marmo L. (2018). *Principles of Forensic Engineering Applied to Industrial Accidents*. Wiley · doi:10.1002/9781118962800
- Fiorentini L., Marmo L. (2011). *La valutazione dei rischi di incendio*. EPC Editore

CG

### Cristian Giovanniello

Fluid dynamics · Fire and explosions

CFDFireExplosionsStacksTunnels

He works on fluid dynamics modelling for safety applications, focusing on fires and explosions, which he simulates with FDS, Viper and Ansys Fluent. He applies the same tools to CFD studies of industrial stacks and the dispersion of their emissions. He also handles tunnel ventilation using one-dimensional tools such as IDA Tunnel. Alongside modelling, he carries out risk analysis, fire prevention, hydraulic calculations, and RAM and human reliability analysis. He is a PhD candidate at the Politecnico di Milano, researching CFD methods for safety applications.

Credentials and publications

- PhD in progress at the Politecnico di Milano: CFD methods for safety
- Giovanniello C., Fiorentini L., Respighi A., Busini V. (2026). *Consequence Assessment of Detonations in Explosive Material Handling Facilities: An Integrated Approach*. Chemical Engineering Transactions 126, 169–174 · doi:10.3303/CET26126029
- 5th Summer School on Fire Dynamics Modeling (2026)

AR

### Andrea Respighi

Fire engineer · Fire modelling

FireFire resistanceWildland fireActive protection

He specializes in numerical fire simulation for civil, industrial and wildland scenarios (OZONE, CFAST, FDS, PANFIRE, FlamMap, WindNinja). He develops scripts to automate result analysis and couple models, such as SAFIR with FDS, and also designs active fire protection systems.

Credentials and publications

- Exida Fire & Gas Professional (FGP) certification
- Giovanniello C., Fiorentini L., Respighi A., Busini V. (2026). *Consequence Assessment of Detonations in Explosive Material Handling Facilities: An Integrated Approach*. Chemical Engineering Transactions 126, 169–174 · doi:10.3303/CET26126029
- Fiorentini L., Lappano M., Berteletti N., Respighi A., Sicari R., Scarpellini S.M., Breveglieri F. (2018). *Case study, building specifications: High-rise health care facility – Italian approach*. SFPE 12th International Conference on Performance-Based Codes and Fire Safety Design Methods, Honolulu

RS

### Rosario Sicari, PE

Risk analysis and structures

Risk analysisBow-tieStructuresFire resistance

A licensed engineer, with TECSA since 2017. He specializes in finite element (FEM) numerical modelling of civil and industrial structures, focusing on seismic vulnerability and on fire resistance with the SAFIR code, also coupled with CFD simulations for non-linear thermo-structural analysis. An expert in risk management (ISO 31000), bow-tie analysis and Barrier Failure Analysis (BFA), he applies human reliability analysis (HRA) methods such as SPAR-H and SHERPA and supports forensic engineering investigations of incidents, near misses and non-conformities.

Credentials and publications

- Fiorentini L., Sicari R., Cancelliere P. (2026). *ALARP: Demonstrating and Documenting Risk Reduction Across Engineering Sectors*. Wiley, in press
- Fiorentini L., Sicari R. (2020). *Analisi, valutazione e gestione operativa del rischio. Bow-Tie, Root Cause Analysis ed altri strumenti conformi alla ISO 31000 per la gestione sistemica del rischio nelle organizzazioni*. EPC Editore
- Fiorentini L., Lappano M., Berteletti N., Respighi A., Sicari R., Scarpellini S.M., Breveglieri F. (2018). *Case study, building specifications: High-rise health care facility – Italian approach*. SFPE 12th International Conference on Performance-Based Codes and Fire Safety Design Methods, Honolulu
- Chiaia B., Marmo L., Fiorentini L., Sicari R., Cantelli Forti A., Bigi S. (2017). *Incendio della motonave Norman Atlantic: indagini multidisciplinari in incidente probatorio*. IF CRASC ’17, Dario Flaccovio Editore, Milano, 129–140
- SAFIR® course (first Italian edition)

NB

### Nicolò Berteletti

Senior fire engineer · NFPA CFPS

Fire preventionPiping networksFire investigationBESS plant safety studies (HMA)

A fire safety expert registered with the Italian Board of Fire Protection Professionals (ex L. 818) and NFPA CFPS certified, he works on fire prevention and on the design of Fire & Gas detection systems and active and passive fire protection systems, including smoke and heat exhaust and hydraulic modelling of fire protection networks. He carries out audits and inspections at railway infrastructures and chemical and petrochemical plants and performs fire risk assessments according to the Italian Fire Prevention Code (Ministerial Decree of 3 August 2015). He also carries out forensic fire investigations and reconstructions according to NFPA 921 and wildfire simulations with FlamMap/FARSITE and WindNinja, including satellite imagery analysis with European Space Agency (ESA) tools.

Credentials and publications

- Certified Fire Protection Specialist (NFPA)
- CINEAS master in “Fire Investigations” (2024)
- Vazzana F., Fiorentini L., Dattilo F., Berteletti N. (2024). *Risk Management in Energy Storage using Lithium-Ion Batteries: Emerging Risks Associated with BESS Systems*. Chemical Engineering Transactions 111, 463–468
- Fiorentini L., Berteletti N., Dattilo F., Vazzana F. (2023). *La gestione del rischio nello stoccaggio energetico mediante batterie agli ioni di litio: i rischi emergenti connessi con gli impianti BESS*. SAFAP 2023 proceedings, Brescia
- Fiorentini L., Lappano M., Berteletti N., Respighi A., Sicari R., Scarpellini S.M., Breveglieri F. (2018). *Case study, building specifications: High-rise health care facility – Italian approach*. SFPE 12th International Conference on Performance-Based Codes and Fire Safety Design Methods, Honolulu
- Zio E., Di Maio F., Berteletti N., Carpignano A., Ganci F. (2008). *Analisi delle incertezze nella modellazione di un impianto di distribuzione di idrogeno per autotrazione*. Convegno VGR 2008, Pisa

## Publications

A selection of papers and books by the group in the fields NVMERIA works in.

- 2026 Fiorentini L., Sicari R., Cancelliere P. ALARP: Demonstrating and Documenting Risk Reduction Across Engineering Sectors. Wiley, in press RISK
- 2026 Giovanniello C., Fiorentini L., Respighi A., Busini V. Consequence Assessment of Detonations in Explosive Material Handling Facilities: An Integrated Approach. Chemical Engineering Transactions 126, 169–174 · [doi:10.3303/CET26126029](https://doi.org/10.3303/CET26126029) EXPLRISK
- 2024 Vazzana F., Fiorentini L., Dattilo F., Berteletti N. Risk Management in Energy Storage using Lithium-Ion Batteries: Emerging Risks Associated with BESS Systems. Chemical Engineering Transactions 111, 463–468 BESSRISK
- 2024 Fiorentini L., Cancelliere P. Fire Protection Systems functional safety requirements in performance-based design: proposed workflow and a simple case application. Journal of Physics: Conference Series 2885, 012088 · [doi:10.1088/1742-6596/2885/1/012088](https://doi.org/10.1088/1742-6596/2885/1/012088) FIRE
- 2023 Fiorentini L., Dattilo F. Fire Risk Management: Principles and Strategies for Buildings and Industrial Assets. Wiley · [doi:10.1002/9781119827467](https://doi.org/10.1002/9781119827467) FIRERISK
- 2021 Danzi E., Fiorentini L., Marmo L. FLAME: A Parametric Fire Risk Assessment Method Supporting Performance Based Approaches. Fire Technology 57, 721–765 · [doi:10.1007/s10694-020-01014-9](https://doi.org/10.1007/s10694-020-01014-9) FIRERISK
- 2021 Danzi E., Fiorentini L., Marmo L. Fire & Explosion Risk Assessment: Application to the Fine Chemicals Industry. Chemical Engineering Transactions 86, 241–246 FIREEXPL
- 2021 Fiorentini L. Bow-Tie Industrial Risk Management Across Sectors: A Barrier-Based Approach. Wiley · [doi:10.1002/9781119523857](https://doi.org/10.1002/9781119523857) RISK
- 2020 Fiorentini L., Sicari R. Analisi, valutazione e gestione operativa del rischio. Bow-Tie, Root Cause Analysis ed altri strumenti conformi alla ISO 31000 per la gestione sistemica del rischio nelle organizzazioni. EPC Editore RISK
- 2019 De Biagi V., Chiaia B., Fiorentini L., Zannini Quirini C. Seismic Vulnerability Assessment of Fuel Storage Tanks in Italy. Journal of Pressure Vessel Technology 141(1), 010905 · [doi:10.1115/1.4040313](https://doi.org/10.1115/1.4040313) STRUCT
- 2018 Fiorentini L., Marmo L. Principles of Forensic Engineering Applied to Industrial Accidents. Wiley · [doi:10.1002/9781118962800](https://doi.org/10.1002/9781118962800) FORENSIC
- 2016 Fiorentini L., Marmo L., Danzi E., Puccia V. Fire risk assessment of photovoltaic plants. A case study moving from two large fires. Chemical Engineering Transactions 48, 427–432 FIREFORENSIC
- 2014 Fiorentini L., Marmo L., Piccinini N. Forensic engineering applied to the analysis of a gas explosion in a residential building. International Journal of Forensic Engineering 2(2), 152–164 · [doi:10.1504/ijfe.2014.066317](https://doi.org/10.1504/ijfe.2014.066317) EXPLFORENSIC
- 2013 Marmo L., Piccinini N., Fiorentini L. Missing safety measures led to the jet fire and seven deaths at a steel plant in Turin. Dynamics and lessons learned. Journal of Loss Prevention in the Process Industries 26(1), 215–224 · [doi:10.1016/j.jlp.2012.11.003](https://doi.org/10.1016/j.jlp.2012.11.003) FIREFORENSIC
- 2011 Fiorentini L., Marmo L. La valutazione dei rischi di incendio. EPC FIRE
- 2009 Crippa C., Fiorentini L., Rossini V., Stefanelli R., Tafaro S., Marchi M. Fire risk management system for safe operation of large atmospheric storage tanks. Journal of Loss Prevention in the Process Industries 22(5), 574–581 FIRERISK

[Full list on Google Scholar](https://scholar.google.com/citations?user=fmkczWgAAAAJ)

## The group

NVMERIA is a division of TECSA. It works on direct appointments and within the group’s assignments, where the question has already been framed in regulatory, engineering or judicial terms.

The parent company

## TECSA S.r.l.

TECSA works in process safety, fire prevention, machinery safety, occupational hygiene, project risk management and environmental matters. It provides technical consulting, risk assessments, compliance documentation and specialist training to industrial and institutional clients. Many of the questions NVMERIA works on come from these assignments.

[Visit the site · tecsasrl.it](https://www.tecsasrl.it)

The forensic engineering division

## MFC Forensic

MFC Forensic is the TECSA division dedicated to the technical investigation of incidents: reconstruction of the causes of fires, explosions and accidents, analysis of physical evidence, support to the parties and to the judicial authority. It is the division NVMERIA works with most often: computation checks whether the reconstruction of an event is physically consistent.

[Visit the site · mfcforensic.it](https://www.mfcforensic.it)

In joint assignments the roles are clear. TECSA and MFC Forensic define what has to be demonstrated: the regulatory framework, the acceptance criteria, the credible accident hypotheses, the expert’s question. NVMERIA checks by computation whether those hypotheses hold, and with what margin.

---
Original page: https://www.nvmeria.it/en/about/
